Game Inspection

This new game is ready to play upon removal from the shipping carton. However, your careful inspection is needed to supply the final touch of quality control. Please follow these steps to help us insure that your new game was delivered to you in good condition.


Do not plug the game in yet!

C. Game Installation

Figure 2 Installation Requirements


Temperature Humidity Space Required Game Height

175 watts

Oto 38° C (32 to 100° F) Not over 95% relative 65x79 cm (25V2X31 in.) 184 cm (72V2 in.)

1. Examine the exterior of the game cabinet for dents, chips, or broken parts.

2. Unlock and open the access panel of the cabinet and inspect the interior of the game as follows:

a. Check that all plug-in connectors (on the game harness) are firmly seated. Replug any connectors found unplugged. DON'T FORCE CONNECTORS TOGETHER. The connectors are keyed so they only go on in the proper orientation. A reversed edge connector will damage a PCB.

b. Check that all plug-in integrated circuits on the game PCB are firmly seated in their sockets.

Was this article helpful?

0 0

Post a comment