Testing Game ROMs

The game has two sets of processor ROMs. The video processor ROMs are tested first. The second processor ROMs are tested next. This takes about 40 seconds. When a ROM is tested, a hexadecimal number appears after each ROM loca Table 2-4 ROM Locations by Error Address Table 2-4 ROM Locations by Error Address tion. This number is used by Atari Games development. If the game has an error in the program ROM, then the error number is shown at the bottom of the screen. See Table 2-4 for the location...

Playing the Game

Audio Interconnect Harness Kit

Escape takes place on the surface of a futuristic, imaginary industrial planetoid called Planet X. The humans stationed on Planet X have been enslaved and forced to create a robot empire destined to attack earth. The two heroes, Jake and Duke, must find their way through multiple levels of robot factories and the maze of the canal zones in search of Professor Sarah Bellum a voluptuous young lady famous for her knowledge of cybernetics , freeing other human hostages along the way. Players...

Connecting Power Wires

Connect the wires on the JAMMA harness to the wires for the power supply. You need 5V, -5V, and 12V for the Escape kit. This kit may not require all of the voltages used in your original game. Tie off any unused wires on the power supply. 2. You will notice that there is more than one wire for each voltage. You must use more than one wire, as called out in the footnotes of Table 1-2. Using more than one wire for each voltage ensures that you do not overload the edge connector and cause it to...