Optical Sensitivity Adjustment

The Cheyenne uses an Optical Sensor PCB mounted ill the forestock to monitor the scanning electron beam of the CRT. Gun positioning information from this Optical Sensor PCB is monitored by the Logic PCB. The Optic PCB sensitivity adjustment allows for monitor intensity, distance between gun and monitor and the electronic circuitry tolerance. During game play each time the trigger is pulled there will be a white flash and a small dot is displayed wherever the gun is aimed. If for any reason t he...

Gun Sight Alignment

Open the Coin Door to access the AC interlock switch, game will power down. 2. While holding down the START BUTTON pull out the interlock switch to restore power. After a burst of sound the screen should display the MANUAL DIAGNOSTIC MENU MODE. 3. Be sure the index is pointing to GUN SIGHT ALIGNMENT, use the Start Button to index if not. 4. Pull gun trigger and a crosshair (+) will be displayed, release gun trigger. 5. Aim the gun sight to center of crosshair, pull gun trigger once and gun...