148001001

6 x 9-Inch 4-Ohm 15W Oval High-Fidelity Speaker

* Acceptable substitutes are part numbers 70-304 (tube) and 99-11011 (clamp). They must be used together.

* Acceptable substitutes are part numbers 70-304 (tube) and 99-11011 (clamp). They must be used together.

D. Video Display

Shock Hazard

The following procedure should only be performed by a qualified service technician. Prior to removing or repairing the video display, unplug the game. As an extra precaution, we highly recommend you discharge the high voltage from the picture tube. High voltages may exist in any video display, even with power disconnected. Use extreme caution and do not touch electrical parts of the display yoke area with your hands or with metal objects in your hands!

Implosion Hazard

If you drop the display and the picture tube breaks, it will implode! Shattered glass and the yoke can fly 6 feet or more from the implosion. Use care when replacing any display.

To Remove Video Display:

1. Open the rear access panel and unplug the three display harness connectors and disconnect the green ground wire.

2. The rear of the display chassis is attached to a mounting bracket. Remove the hardware that secures the chassis to this bracket.

3. Open the control panel (see Figure 3-2).

4. Remove the 5 button-head screws that secure the upper cabinet grille to the cabinet (see Figure 3-5). Lift the grille up and away from the cabinet.

5. Lift the video display shield up and out of the cabinet.

6. Carefully remove the cardboard bezel.

7. Remove the four sets of hardware that secure the display chassis to the wood frame.

8. Carefully remove the display through the front of the cabinet. After servicing the display, reinstall in reverse order.

0 0

Post a comment