Note

This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of Federal Communications Commission (FCC) Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area or modification to this equipment is likely to cause interference in which case the user, at his own expense, will be required to take whatever measures may be required to correct the interference. If you suspect interference from an ATARI® game at your location, check the following:

• All green ground wires in the game are properly connected as shown in the game wiring diagram.

• The power cord is properly plugged into a grounded three-wire outlet.

If you are still unable to solve the interference problem, please contact Customer Service at Atari Games Corporation. See the inside front cover of this manual for service in your area.

Table of Contents

1 Set-Up

How to Use This Manual 1-1

Inspecting the Game 1-2

Installing the Control Panel 1-2

Control and Switch Locations 1-2

Power On/Off Switch 1-2

Volume Control 1-2

Coin Counters 1-2

Self-Test Switch 1-2

Coin and Game Option Settings 1-2

2 Game Play

Introduction 2-1

Attract Mode 2-2

Play Mode 2-2

High Score Mode 2-2

Hints for Game Play 2-3

Maximizing Earnings 2-3

Self-Test Mode 2-3

3 Self-Test

RAM/ROM Test 3-2

Switch lest 3-3

Coin Options 3-3

Game Options 3-4

Statistics 3-5

Histograms 3-5

Playfield Test 3-5

Motion Object Test 3-5

Alpha Test 3-6

Color Test 3-6

Color Purity Test 3-7

Convergence Test 3-7

Sound Test 3-8

4 Maintenance

Preventive Maintenance 4 2

Preventive Maintenance Intervals 4-2

Removing the Control Panel 4-2

Cleaning the Pushbutton Leaf Switches 4-2

Cleaning the Coin Mechanism 4-2

Cleaning the Interior Components 4-2

Joystick Controls 4-3

Lubricating the Joystick Controls 4-3

Corrective Maintenance 3

Removing the Pushbutton Leaf Switches 4-4

Removing the Joystick 4-4

Disassembling the Joystick 4-4

Removing the Joystick Leaf Switches 4-5

Removing the Game PCB 4-5

Removing the Video Display 4-6

Replacing the Video Display 4-7

Removing the Speakers 4-8

5 Illustrated Parts List

See List of Illustrations that follows.

Was this article helpful?

0 0

Post a comment