8 1 Line Replacement

To replace the line, openthe Chassis Front Door and remove the lid by referring to 2 , Section 4

Install the line to the rod. The line provided has a loop. Firmly secure it is shown.

HOW TO LOOP:

Knot the line by folding it at approximately 120mm from the end of the line and loop it as shown.

Knot the line by folding it at approximately 120mm from the end of the line and loop it as shown.

(2) Pass the line through the Sensor Unit

SENSOR UNIT BOTTOM SECTION Ensure that the line passes between each Roller.

8 - 2 REPLACING THE REEL'S SWITCH AND VOLUME Take Out the 2 screws and remove the cover.

(2 Remove the cap from each button.

Was this article helpful?

0 0

Post a comment