The coin selector should be cleaned once every 3 months. When cleaning, follow the procedure below:
Q Turn the power for the machine OFF. Open the coin chute door.
2 Open the gate and dust off by using a soft brush (made of wool, etc.).
3 Remove and cleen smears by using a soft cloth dipped in water or diluted chemical detergent and then squeezed dry.
@ Remove the CRADLE.
When removing the retaining ring(E-ring), be very careful so as not to bend the shaft.
@ Remove stain from the shaft and pillow portions by wiping off with a soft cloth, etc.
@ After wiping as per #5 above, further apply a dry cloth, etc. to cause the coin selector to dry completely.
Was this article helpful?