Diagram Trackball

Diagram Trackball

Installing the trackball as far away from the monitor as possible will prevent players hands from hitting the monitor glass when rolling the trackball forward. TRACKBALL MUST 8E CENTERED ON THE CONTROL PANEL When moking the hole for the trackball, follow the instructions, starting on the right, for the type of control panel you will be using. When installing the trackball, make sure the trackball is in the right orientation. Refer to picture below. Poirtior I ha ir c lt bali as l r Awaf Votn ih...

Return Merchandise Authorization

All returned merchandise must have a Return Merchandise Authorization RAM number marked clearly on the outside of the package. You must obtain all RAM numbers from your authorized Incredible Technologies, Inc. distributor. Please have your Incredible Technologies, Inc. serial number available when calling for an RMA number. Merchandise returned without an RMA number will not be accepted. Advance replacement boards will be shipped to distributors or, at the distributor's request, will be...

Preparing a used cabinet for Golden Tee

Remove the following from the cabinet 2. Thoroughly clean out your cabinet. Remove all the old buttons, joysticks and wires from the control panel. DO NOT remove monitor and speaker wires. 3. Remove the old graphics and adhesive from the control panel, and the side of the cabinet. Remove adhesive with solvent. 4. For a fresh look, painting is highly recommended. Spray painting gives a better finish, but if an air brush or paint sprayer is unavailable, a roller is second best. Remember to...