To mount trackball to a wooden control panel with routing capability use Trackball Mounting Template

Fill any existing holes in the wooden control panel. 2. Place and secure Template 2 to your control panel in the desired location. NOTE The trackball should be as far away from the monitor as possible. 3. Carefully cut the hole for the trackball in the shape indicated on the template. 4. Drill the mounting holes indicated. 5. Next route out the shaded area indicated on TEMPLATE 2, 1 16 deep. Use a 1 2 Rabbiting Bit for best results. This is so the supplied metal plate will be flush with the...

To mount trackball to a wooden control panel without routing capability use Trackball Mounting Template

Fill any existing holes in the wooden control panel. 2. Place and secure Template 3 to your control panel in the desired location. NOTE The trackball should be as far away from the monitor as possible. 3. Carefully cut the hole for the trackball in the shape indicated on the template. The trackball should fit the hole shape exactly. 4. Drill the mounting holes as indicated. 5. Remove template and file down any rough edges. 6. Using the Trackball Orientation Template, cut a 3 hole in the...