Life Test

Figure 2-19 Pots: 12-Bit Screen

Figure 2-20 Steering Wheel Submenu Screen

Figure 2-19 Pots: 12-Bit Screen

Figure 2-20 Steering Wheel Submenu Screen

Exit returns to Main Board Controls.

Send Force sends a steady force to the Motor Amplifier PCB. See Figure 2-21.

Sine Wave sends a sine wave force to the Motor Amplifier PCB. This screen is similar to Figure 2-21.

Square Wave sends a square wave force to the Motor Amplifier PCB. This screen is similar to Figure 2-21.

Triangle Wave sends a triangle wave force to the Motor Amplifier PCB. This screen is similar to Figure 2=21.

Closed Loop Test reads the steering wheel position and sends a force to the steering wheel motor amplifier PCB to simulate a simple spring.

Line Voltage Calibration can be used to calibrate the simulator voltage reading to the line voltage reading. Put a voltmeter on the line, then set the voltage on this screen to match.

Opto Test is a test used by manufacturing.

Life Test is a test used by manufacturing quality assurance.

0 0

Post a comment