Air Filter Removal

(SIT-DOWN VERSION)_

CAUTION: CLEAN THE AIR FILTER MONTHLY. The air filter is used to filter out dust particles that could otherwise enter the inside cabinet and damage the game.

1. Unplug the game.

2. Unlock and open the rear cabinet door.

3. The filter and fan are located at the lower left corner by the rear door of the rear cabinet in reference to facing the inside of the rear cabinet. Slide the filter door to the right as far as it will slide.

4. Pull the top of the filter door out and pull the door up to remove.

5. Slide the filter out which is encased in a metal frame.

I. INSTALLATION, II. INITIALIZATION, III. GAME OPERATION

6. Clean the filter in a warm soapy solution.

7. For reassembly, reverse the above procedure. Replace the filter with the grill side facing up.

AIR FILTER REMOVAL (UPRIGHT VERSION)

1. Unplug the game.

2. Unlock and open the rear cabinet door.

3. The filter door is located at the center of the cabinet directly in front of the back door. Pull the filter door up to remove.

4. Pull the filter straight out.

5. Clean the filter in warm soapy water.

6. For reassembly, reverse the above procedure.

G. MONITOR LENS CLEANING (SIT-DOWN ONLY)

1. Unplug the game.

2. Unlock the front glass with keyed lock located on the upper left outside of the cabinet in reference to sitting inside the player compartment.

3. Lift the front glass up and then out.

4. Remove the CRT frame.

5. Remove the filter glass by lifting up and then out.

6. Remove the four screws from the bottom lens lock,

7. Remove the lens lock board.

CAUTION: THE LENS SCRATCHES EASILY. PRACTICE EXTREME CARE WHEN HANDLING. AVOID TOUCHING THE RIDGED SURFACE OF THE LENS._

8. Pull the bottom of the lens forward to clear the frame and then pull out. When reinstalling the lens, be certain that the ridges are facing into the player compartment.

9. ON THE SMOOTH SURFACE ONLY: Clean with a very mild warm soapy water solution and a clean soft rag.

ON THE RIDGED SURFACE ONLY: Clean with warm water only and a clean soft rag.

10. For reassembly, reverse the above procedure.

Was this article helpful?

0 0

Post a comment