Cable Block Diagram

Assembly 1-18

[ ] 4. Open the player control panel and locate player panel cable H-22785. This cable connects to the joysticks, switches, fuses, and I-40 adapter. Connectors designated Player 1 (mostly white wire colors) and Player 2 (violet) mate with the same color cables from the main harness. Player 3 (blue) and Player 4 (gray) connectors mate with the same color cables from the main harness. Power connectors (red and black) from player panel fuses mate with the same color cable from the main harness.

[ ] 5. Check wiring to the Auxiliary Output Adapter Board against instructions in Wire the Cabinet. The block diagram below also depicts this wiring.

[ ] 6. A shielded cable should join Video Board jack J4 and CPU Board plug P4.

[ ] 7. Have you connected the monitor to the Main Harness?

[ ] 8. Assure that you've reinstalled all fuses. Check that you've set DIP switches correctly (Chapter Three).

[ ] 8. Assure that you've reinstalled all fuses. Check that you've set DIP switches correctly (Chapter Three).

Diagram Board
TYPICAL REAR VIEW OF COMPLETED CABINET
0 0

Post a comment