51 Before Installing

You prepare the necessary items to install this product as follows.

Items needed

Remarks

Reference

Operation manual attached to your cabinet

Check the handling of your cabinet.

(+) Countersunk head-tapping screw (4 pieces) Diameter: one size smaller than the diameter of installation hole on the side of lesslocks which fix lesslocks on the install board. Length: Long enough to fix the lesslocks on the install board but not too long to stick through the install board

Fix the lesslocks on the install board of your cabinet. You may use the furnished ones with your cabinet.

Chapter 5-2 (page 11)

Lesslock (4 pieces)

Those which have holes to be installed on the install board and holes to install the PC board

Keep space between the install board and the PC board. You may use the furnished ones with your cabinet.

Chapter 5-2 (page 11)

Pan head machine screw (4 pieces)

Diameter: appropriate size for the PC board installation hole (or internal thread) of the lesslock. Length: Not too long to stick through the lesslock when the PC board is fixed, or not too short to fix it on the lesslock. You can adjust the length by using the spacer mentioned below in cases the screws are too long.

Fix the PC board into the lesslocks. You may use the furnished ones with your cabinet.

Chapter 5-2 (page 11)

Spacer (4 pieces) Minor diameter:

appropriate size for the screws mentioned above.

Length: appropriate size to adjust the length of the screws above.

Adjust the length of the pan head machine screws when installing the PC board on the lesslocks. Not necessary unless the pan head machine screws are too long. You may use the furnished ones with your cabinet.

Chapter 5-2 (page 11)

Solder or caulking, or crimp-style terminal

Connect wires to micro switches. Please read the referential chapters to check if they are necessary or not.

Chapter 5-3-1 (page 13), Chapter 5-3-3 (page 15), Chapter 5-3-4 (page 16)

Insulating heat contraction tube and a drier for heat contraction tube

Insulate the connection parts of the wires. Please read the referential chapters to check whether they are necessary or not.

Chapter 5-3-1 (page 13), Chapter 5-3-3 (page 15)

Insulating tape

Insulate the edge of unnecessary wires and connectors. Not necessary when connecting to the cabinet corresponding to JAMMA standard with 2 speakers(stereo specification).

Chapter 5-3-4 (page 16), Chapter 5-4-2 (page 20)

Was this article helpful?

0 0

Post a comment