613 Finishing the Test Mode

After making adjustment of each item according to "6-2 Display Test" (p.24) through "6-8 Data Clear" (p.40), display the test menu screen.

D Hit the PI 4-direction joystick up or down to turn "EXIT & SAVE" in red. B Press the PI button switch. The test mode finishes and it returns to the game screen.

* In case that the test switch on the cabinet is used, turn that test switch OFF.

• If the test mode is not finished in the above procedure, the adjusted result (setting or altering) may not be effective. Always finish the test mode in the above procedure. (The test mode cannot be finished only turning the test switch OFF without selecting "EXIT & SAVE".)

Was this article helpful?

0 0

Post a comment