621 Common Operation

Perform the procedure II - □ of "6-1-2 Selecting the Adjusting Items" (p.22-23). Select "DISPLAY TEST" in B

"Color Edit" screen shall be displayed over the "diagonal" screen as follows.

, Color edit screen

/ Interlace Contrast / Bright

SubContR / SubContG ^ SubCont B

PREVIOUS VALUE EXIT COLOR EDIT NEXT COLOR TEST EXIT

/ Interlace Contrast / Bright

SubContR / SubContG ^ SubCont B

PREVIOUS VALUE EXIT COLOR EDIT NEXT COLOR TEST EXIT

Color edit screen is displayed over the diagonal screen. * Pressing the PI button switch the "color edit" screen displayed/non-displayed.

How to enter the color edit mode How to go to the next test pattern How to return to the test menu screen

The color edit screen is not displayed

How to enter the color edit mode How to go to the next test pattern How to return to the test menu screen

The color edit screen is not displayed

El Press the PI button switch to go the other adjustment item.

* Each time you Press the PI button switch, it shifts from "DIAGONAL" -> "COLOR

BAR" -> "CONVERGENCE" -> "DIAGONAL" and its screen is displayed each time.

El According to the item to be adjusted, perform the procedure described under "6-2-2 DIAGONAL" (p.26) through "6-2-4 CONVERGENCE" (p.30).

El Press the PI start switch to return to the test menu screen after completing the whole "DISPLAY TEST". The test menu screen (p.22) is displayed.

El Perform "6-1 -3 Finishing the Test Mode" (p.24) to exit the test mode.

Was this article helpful?

0 0

Post a comment