Upright Cabinet

Removing the Tube and Speaker Board 1. From the back of the game, unlock and open the rear access panel. Unplug the tube and speaker's 5-pin harness connector (see Figure 3-11). 2. From the front of the game, remove the three button-head screws and lock washers that secure the upper attraction-panel retainer to the cabinet. Loosen the screws ana washers that secure the iower attraction-panel retainer to the cabinet. 3. Remove the attraction glass. 5. Remove the two wood screws that secure the...

Gear Shifter Control Assembly Parts List

Assemblies and components listed in the following parts list are shown in Figure 3-8. Assemblies and components listed in the following parts list are shown in Figure 3-8. Single-Pole Single-Throw Low-Force Miniature Switch 6 x 0.38-Inch Steel Plastite Screw Acceptable substitutes are part nos. 72-JB3608, 72-JA4608, 4-40 x 0.75-Inch Cross-Recessed Pan-Head Steel Machine Screw See text for lubrication information. Figure 3-9 Foot-Pedal Control Assembly See text for lubrication information....

Central Processing Unit Printed Circuit Board Assembly Parts List continued

2.2 kfi, 2 , Duai-lniine-Package Resistor Network 1 kfi, 2 , Duai-lniine-Package Resistor Network 40-Contact Medium-Insertion-Force Integrated Circuit Socket 28-Contact Medium-Insertion-Force Integrated Circuit Socket 28-Contact Medium-Insertion-Force Integrated Circuit Socket 28-Contact Medium-Insertion-Force Integrated Circuit Socket 28-Contact Medium-Insertion-Force Integrated Circuit Socket 28-Contact Medium-Insertion-Force Integrated Circuit Socket 28-Contact Medium-Insertion-Force...

Printed Circuit Board Mounting Hardware Parts List

Assemblies and components in the following parts list are shown in Figure 3-18. Description A037701-01 72-1404F 72-1604F 034536-03 037873-01 039378-03 175004-708 175009-221 U.S-Bullt Upright and Sit-Down Cabinets Electromagnetic Interference (EMI) Cage (includes guides) 4-40 x 1 4-lnch Cross-Recessed Steel Screw 6-32 x 1 4-lnch Cross-Recessed Steel Screw Foam Pad Dual-Slotted Retainer 8 Fiber Washer Ireland-Built Upright and Sit-Down Cabinets* 6 x 1 1 2-lnch Cross-Recessed Pan-Head Tapping...

Figure 318 Removing the Printed Circuit Boards

Before you remove or repair any printed-circuit board, turn the game off. Unplug the End PCB that connects the two game PCBs. Removing the Printed-Circuit Boards Removing the Game PCBs from the EMI Cage 2. The game printed-circuit boards (PCBs) are located inside the electromagnetic interference (EMI) cage (see Figure 3-18). The EMI cage is located on the cabinet wall of the Upright game and on the inside of the rear access panel of the Sit-Down game. Unplug the two harness edge-connectors from...

Figure 31 Cabinet Mounted Assemblies USBuilt Upright Cabinet A03935201 H Ireland Built Upright Cabinet A03935202 H

Assemblies and components in the following parts list are shown in Figure 3-1. Strain-Relief Power Cord (U.S. and Canada) Electromagnetic Interference Cage (includes guides) Cabinet Assembly (includes glides and PCB retainers, but not access panel) Main Harness Assembly (for U.S. PCB) Strain-Relief Power Cord (Austria, Belgium, Chile, Denmark, Finland, France, Germany, Greece, Indonesia, Italy, Netherlands, Norway, Spain, Sweden, and Uruguay) Cabinet Assembly (includes glides and PCB retainers,...

How to Use this Manual

This manual, written for game operators and service technicians, describes the Pole Position game. The manual contains information about the Upright and Sit-Down Pole Position cabinets. Whenever information is unique to the Upright cabinet, this symbol appears Whenever information is unique to the Sit-Down cabinet, this symbol appears Wherever information is unique to Ireland-Built games, this symbol appears _ Chapter 1 describes new features, game setup, settings of option switches, self-test...