Note

If it is necessary to disassemble the foot-pedal control assembly and remove the pulley cable (part no. 039242-01), MAKE SURE the cable is wound as illustrated in Figure 3-10. BE CAREFUL not to cut or fray the cable in the disassembly/assembly process. Note that the foot-pedal assembly must be removed from the game cabinet in order to wrap the cable correctly.

Wrap the cable twice around the cap screw in a clockwise direction.

Bring the cable back through the notch and wrap it around the pulley one and one-half times.

Wrap the cable twice around the cap screw in a clockwise direction.

Bring the cable back through the notch and wrap it around the pulley one and one-half times.

8. Attach the smaller eyelet on the cable to the cable spring. NOTE: You may find it helpful to compress the base plate slightly and extend the cabie spring during this step.

CABLE SPRING

SMALLER EYELET

Figure 3-10 Foot-Pedal Pulley Cable Rewinding, continued

CABLE SPRING

SMALLER EYELET

Figure 3-10 Foot-Pedal Pulley Cable Rewinding, continued

0 0

Post a comment