26 Monitor

Remove the Control Panel, Monitor Glass and Bezel to make the monitor adjustments.

^ V. POSI (Vertical Position Control) adjusts the vertical display position of the image.

^ V. HOLD (Vertical Synchronization Control) adjusts the image running from left to right.

^ V. SIZE (Vertical Size Control) adjusts the length of the screen.

^ H. PHASE (Horizontal Position Control) adjusts the horizontal display position of the image.

^ H. HOLD (Horizontal Synchronization Control) adjusts the image running from left to right.

^ H. SIZE (Horizontal Size Control) adjusts the width of the screen. For adjustments, utilize the Alignment Screwdriver.

ik BRIGHT (Brightness Control)

Adjusts colors (Ordinarily, B.C.R. BIAS should not be touched.)

H FOCUS (Focus Control)

SCREEN (Focus Control)

(Ordinarily, SCREEN should not be touched.)

MAIN BOARD

rnzp rnzp

FOCUS (UPPER) SCREEN (LOWER)

V. POSITION

V. HOLD

V. SIZE

H. HOLD

H. PHASE

H. POSITION

H. SIZE

BRIGHT

B. BIAS

BRIGHT

B. BIAS

G.

GAIN

„R.

BIAS

NR.

GAIN

St www. bascmentoreidc com

Was this article helpful?

0 0

Post a comment