C installation requirements

Voltage Selection

Your Video Pinball™ game is shipped for operation at 110 VAC, 60 Hz

IF YOUR LOCAL UNE VOLTAGE IS 110 VAC, perform the following steps;

1 Measure AC line voltage with an AC voltmeter as shown in Figure 1 2

2. If AC line voltage is consistently below 100 VAC, plug in the black low-voltage connection, on the power supply chassis. See Figure 1-3.

3. if AC line voltage is approximately 110 VAC. plug in the orange connection (factory installed).

Was this article helpful?

0 0

Post a comment